müller coax group

Special Valves

PCB-1 10

Data Sheets
General Operating Manual
ports threads G 3/8
function NC / NO
pressure range 0-25 bar see pressure diagram
KV value 3,0 /h
media gaseous  liquid  highly viscous  gelatinous  pasty  contaminated
flow direction A B as marked
switching cycles 60 1/min
switching time 30-3000 ms opening
30-3000 ms closing
media temperature 60 °C direct mounted pilot valve
ambient temperature 50 °C direct mounted pilot valve
weight 1,1 kg
nominal voltage Un 24 V DC
Un 230 V 40-60 Hz AC
protection IP65
energized duty rating ED 100%

The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics.

Product description

This type is a pneumatically or hydraulically actuated valve with 2 port connections and 2 switching positions. As standard, the control is carried out via a direct mounted pilot 5/2-way valve, or via a pilot valve cluster, provided by the customer.

The PCB has been especially designed for highly abrasive, adhesive, aggressive or toxic media. This valve series is highly successfully used for glue applications, bonding technology as well as for coolant supply in mechanical engineering, up to 25 bar.

The special feature of the PCB is that it is hermetically sealed to the outside by a metal bellows and is also equipped with a wear resistant valve seat; this is because the media hardens when making contact with air, which would destroy a conventional valve. The PCB can be used as a single valve as well as in a module or manifold. At the same time, the proven cartridge design also ensures an economical and space-saving installation.

By utilizing air throttles on the pilot valve, the switching times can be adjusted by the customer as desired. Switching delays of up to three seconds when opening and closing are possible. This feature helps to prevent hydraulic shocks in piping systems.

Options

The valves can be equipped with many options such as alternative pilot valves, limit switches, mounting brackets, diverse plug connections such as M12x1 DESINA / VDMA.

Features

  • specially developed for glue and adhesive
  • hermetically sealed against the atmosphere by means of a metal bellows - no leakage bore
  • no carrying-over of the medium, thanks to dynamic seals
  • wear-resistant valve seat
  • in the event of actuation air failure, the valve fails close, tight at the seat
  • proven and tested cartridge system, the valve cartridge can be replaced within a few minutes
  • valve body available in stainless steel or aluminium
  • max. pressure 25 bar
  • G 3/8“

Accessories

pilot valve

pilot valve
C 10 / C 15 / VK 10
5/2-way-pilot, electro-pneumatic, G 1/8, with throttles, p = 4 - 10 bar
Item No. 0 820 038 980 (NC)
Item No. 0 820 038 981 (NO)

electrical connection

electrical connection
coil with connector M12x1 DESINA / VDMA

electrical connection

electrical connection
connector form B DIN EN 175301-803

limit switch

limit switch
Icomatic
M12x1, DC 10 - 60 V, AC 15 - 250 V, -25°C to +85°C

limit switch

limit switch
Balluff
M12x1, DC 10 - 30 V, -25°C to +70°C

Special Valves